Home
Guides, tips & help
Characteristics of the computer
Technology news
Internet Security
Ask the expert PC
Suggested software
Process library
Computer terms
Please contact us
Sign up for email
Subscribe RSS
There is always the risk of a liquid substance that accidentally spill a laptop. Such liquid may be water, soda-, beer or wine.When this happens, the laptop crashes or water will leave a stain on the LCD screen.The first thing you should do when such an incident the maximum to your laptop or other electronic device is unplug it from the origin of electricity, shut down the machine and remove the battery.Follow the steps outlined below to unmount the portátil.También, computer if the majority of water on the keyboard, you can have the opening of the base of the computer for this part is dry.We will not be envelope in this guide.However, the steps are similar to este.Es hoped that it can remove the water before do you too much damage.
Step 1 - after removing the equipment from the power supply, shut down it and remove the laptop batería.Voltee keyboard down for a few minutes. This should help to drain any excess of agua.Obtenga sized screwdriver and prepare open it.Avoid oversize screwdrivers for this purpose also is important to know that the LCD is delicate and as such should be treated with care.However, before doing this, check that you are enough confidence as to disarm your laptop.If you are not, please contact a qualified technician.
Step 2: now the frame around the screen is the bevel, in it, you will find rubber screw seals.There are usually four of these stamps of tornillo.Quite gently rubber stamps exposed with the screwdriver screws and screw.
Step 3: carefully Peel the screen bezel cover LCD screen.
Step 4-After removing the bezel, their may be some screws in front and two or more screws on the sides that keep the pantalla.Quitar these.
Step 5 - Gently place a towel on the keyboard and carefully remove, and then deposit the LCD in the towel. make sure you remove the inverter Board and video cable.
Step 6 - Take notice of all the screws and the adhesive tape position as you have to make their positions initials. sure do not touch or scratch removal process circuit board.
7 - Step of removing stains from waste water with a soft cloth, put back the LCD.Para screen, you can reverse steps performed initially to disassemble the screen LCD.Ahora can try to turn on the computer.
It is hoped that the computer again when you try again.see does not, you might need to see on a screen LCD reemplazo.También, if your computer does not start, may have to make sure your board basis or another Texan hardware damaged by water.
Web site and all contents copyright 2008 computertooslow.com, all rights reserved.Cleveland Computer Repair Virginia Beach Computer Repair Miami Computer Repair Computer Repair forums
No comments:
Post a Comment